Fast and Reliable

Easy Assembly

High Quality 3D Prints

All Metal 3D Printer

 

 

About Us

MyMatics started in 2012 in The Netherlands and has a focus on new technologies. The tremendous advancements made in the 3D-printing area have intrigued us for several years. We are passionate about 3D-printing and we are convinced 3D-printing will change our everyday life. Making this technology available for everybody is our challenge now. To achieve this goal we build and learn together with our user community.

Making 3D-printing available for everybody, together!

After three prototype versions we have finished our final product:
the Mamba3D printer.
Through our Kickstarter campaign we have raised enough funding to bring it to market and start building a user community. Go to our Kickstart campaign for more details:
Go to Kickstarter page

At the moment we're completing the first production batches. You can pre-order your own Mamba3D to make sure you're in the production run after our Kickstarter batch is send out.
Send us an e-mail for the details.

If you want to get the latest news on progress and site updates, make sure to subscribe to our newsletter below or like us on Facebook

 

 
 

Mamba3D

 

 

You can pre-order your Mamba3D printer NOW

Go to our webshop here

 


Mamba3D

We wanted to build a 3d printer that is accurate, reliable, easy to use and affordable.
The Mamba 3d printer is our 3rd prototype and finally meets our high standards.
We broke down the 3D-printer concept to it's basics.
By doing this, we were able to focus on the high capabilities of the printer.

All Metal
The printer is built-up mostly out of metal parts. The frame is constructed out of black anodized aluminium profile. All the sheet-metal is blank anodized aluminium. By using all metal parts we achieved to get you a durable, robuust and rigid printer which you can enjoy for a long time.
Extruder System
For the extruder direct drive system, we engineered a custom easy release system. With this system you can change filament in just a matter of seconds. Simply pull the lever, swap filament and start printing: A big plus compared to other direct drive systems.
Hot-End
The hot-end is completely produced in metal. This way you can reach high temperatures if needed. The hot-end type is a proven technology and is used in many applications already. Together with the complete construction of the Mamba3D capable of producing high quality prints.
Electronics
The electronics is a single circuit board with integrated stepper drives. The electronics are prepared for any future upgrades like adding a display, SD-card capability and a heated bed to your printer. Standard connectors are provided for easy assembly of all electronics on the printer.

 

Detailed specifications

Frame Anodized aluminum
Extruder All metal
Temperatures up to 300 degrees Celcius
Build Volume (WxDxH) 200mm x 200mm x 200mm (7.87x7.87x7.87 inch)
Filament 1.75mm
Layer Resolution up to 50 microns
Nozzle 0.4mm
Speed Print speed up to 150mm/s, Travel speed up to 300 mm/s
Power 110-240 VAC Power adapter
   
Software Repetier with Slic3r implemented
Firmware Marlin

Product pictures

Be Informed